NEWS CENTER

Dedicated to providing professional fire emergency lighting products and centralized control fire emergency overall solutions for the modern construction industry

20

2023-10

Definition of Evacuation Indication System

The evacuation indication system (BQ-BUS networking solution system) consists of an intermediate communication control module, a wireless relay communication control module, an evacuation light with address code terminal equipment, and a standardized serial communication port number group connected to the fire accident automatic alarm system. Integrate fully automated supervision, control, communication technology with centralized switching power supply (EPS) and emergency lighting fixtures. The serial communication interface power circuit connects the system with the fire alarm system and automatically generates excellent evacuation routes based on evacuation safety channels.

2023-10-20

20

2023-10

Some knowledge points of emergency lighting distribution equipment

The emergency lighting and evacuation sign system software of the emergency lighting distribution device can be divided into centralized control system and non centralized control. EPS emergency power supply can be completed based on centralized and non centralized power supply

2023-10-20

20

2023-10

What are the advantages of fire emergency lights?

Fire Safety Emergency Lighting and Evacuation Indication System Software is a system software that gives lighting and evacuation instructions for staff to evacuate and still need to operate in the event of a fire. It is an essential and key piece of fire fighting equipment in a house building. Fire emergency lights contain fire emergency lights and fire safety emergency evacuation indicator lights. Unbeknownst to you, the selection of fire emergency lights is usually a point of knowledge that people are very easy to ignore but can't be ignored

2023-10-20

20

2023-10

How to test the emergency lighting centralized power supply

1. Check whether the assembly site is in accordance with the regulations. 2. The power distribution should meet the design regulations. 3. The emergency operation time shall not be lower than its own standard emergency operation time. 4. Output lines, power distribution equipment, export power load should be consistent with the design program, not with emergency lighting fixtures, fire evacuation is not relevant.

2023-10-20

20

2023-10

The role of fire emergency lighting and how to argue authenticity

In crowded places, such as hospitals, communities, shopping centers, office buildings and other areas will be equipped with fire emergency lighting, whose key role is to provide lighting for evacuation in emergency situations and for places that still need to work in case of a fire, in order to ensure that the evacuation and rescue work is carried out smoothly. Simply put, it means that when the power goes out, the fire emergency lighting can still operate normally, and the lighting time is not less than 90 minutes

2023-10-20

20

2023-10

Fire emergency lighting systems as the main power supply in emergency situations

Fire emergency lighting system serves as the main power supply in case of emergency. Therefore, this kind of emergency power cabinet is widely used in buildings, shopping malls and other areas as an emergency lighting system to ensure that the lighting requirements can be met when the power supply is abnormal. So what are its obvious advantages? Here's an introduction for you

2023-10-20

20

2023-10

How to use fire emergency lighting

Fire emergency lighting is a fire emergency light to provide illumination for evacuation and fire fighting! Normally powered by external power supply, and automatically switch to battery-powered state in case of power failure! Generally high buildings / shopping malls / entertainment venues and other densely populated places are equipped with emergency lights!

2023-10-20

20

2023-10

Emergency lighting centralized power supply and fire emergency lighting installation summary

Determine the installation location: according to the internal structure of the building and fire requirements, to determine the emergency lighting centralized power supply and emergency lighting installation location. Emergency lighting centralized power supply is usually installed in the fire control room or distribution room, while the emergency lighting is distributed in various key locations within the building, such as corridors, exits, etc.

2023-10-20

20

2023-10

EPS 消防应急电源的使用方法

EPS消防应急电源是用于提供紧急电力供应的设备,用于电力中断或火灾等紧急情况下使用。以下是一般的EPS消防应急电源的使用方法

2023-10-20

14

2023-09

< 123 >

JINYI(GUANGDONG CHINA)LIGHTING CO.,LTD

Add:

3/F, 4/F, 5/F, Building 12, Qifang Industrial Park, Tongyi Industrial Zone, Guzhen Town, Zhongshan City, Guangdong Province, China

Business License